Alpine Metal Tech business units at one glance

Alpine Metal Tech Group Portfolio
Our competences

Steel Business

Wheel Business

Life Cycle Business

Numtec  Gega  Koch H&K

Numtec  Magnemag  Koch H&K

Knorr

Numtec  Makra

Numtec  Gega  Knorr

Koch H&K  Magnemag  Makra

Casting-Floor
Slab

SM-Shroud Manipulator

The Shroud Manipulator is built to achieve an easy handling of the shroud and enables the user to get a straight connection between the ladle slide gate and tundish.

Read more …

PF-Powder Feeder

The Mould Powder Feeder is designed for the automatic distribution of casting powder into the mould which ensures a constant uniform mould powder distribution during the ...

Read more …

PH-Preheating Station

The automatic preheating equipment designed for drying and heating ladle and tundish.

Read more …

Bloom

SM-Shroud Manipulator

The Shroud Manipulator is built to achieve an easy handling of the shroud and enables the user to get a straight connection between the ladle slide gate and tundish.

Read more …

PH-Preheating Station

The automatic preheating equipment designed for drying and heating ladle and tundish.

Read more …

Billet

SM-Shroud Manipulator

The Shroud Manipulator is built to achieve an easy handling of the shroud and enables the user to get a straight connection between the ladle slide gate and tundish.

Read more …

PH-Preheating Station

The automatic preheating equipment designed for drying and heating ladle and tundish.

Read more …

Runout
Slab

TC-Torch Cutting Machine

The high performance Alpine Metal Tech Torch Cutting Machine is designed for cutting casting products on the fly or offline products.

Read more …

DB-Deburrer

The in-line rotary hammer type deburring machine is designed for removing burrs from continous casting products (slab, bloom, billet) caused by torch cutting.

Read more …

MP-Metal Powder Marking Machine

The Metal Powder Marking Machine is designed for marking of slabs and blooms by blowing metal powder through a gas flame for melting it to the surface of the product.

Read more …

HS-Hot Spray Marking Machine

The Hot Spray Marking Machine is designed for the marking of slabs and blooms by blowing liquid metal which is melt in an electric arc between two wires to the surface of ...

Read more …

SN-Single Nozzle Paint Marking Machine

The Single Nozzle Paint Marking Machine is designed for the marking of coils, tubes and sections as well as for slabs, blooms and billets based on paint marking with sing ...

Read more …

RH-Revolving Head Stamping Machine

The Revolving Head Stamping Machine is designed for the permanent marking of slabs, blooms and billets by the stamping of unmistakable and full characters.

Read more …

DP-Dot Paint Marking Machine (7 or 9 Nozzles Classic)

The Dot Paint Marking Machine is designed for the marking of coils, slabs, blooms and billets based on paint marking with 7 or 9 nozzle marking sections.

Read more …

RT-Reading & Tracking System

The reading and tracking system is an automatic reading system for many kinds of marked, labelled and printed products which allows material tracking from casting to roll ...

Read more …

Bloom

TC-Torch Cutting Machine

The high performance Alpine Metal Tech Torch Cutting Machine is designed for cutting casting products on the fly or offline products.

Read more …

DB-Deburrer

The in-line rotary hammer type deburring machine is designed for removing burrs from continous casting products (slab, bloom, billet) caused by torch cutting.

Read more …

MP-Metal Powder Marking Machine

The Metal Powder Marking Machine is designed for marking of slabs and blooms by blowing metal powder through a gas flame for melting it to the surface of the product.

Read more …

HS-Hot Spray Marking Machine

The Hot Spray Marking Machine is designed for the marking of slabs and blooms by blowing liquid metal which is melt in an electric arc between two wires to the surface of ...

Read more …

SN-Single Nozzle Paint Marking Machine

The Single Nozzle Paint Marking Machine is designed for the marking of coils, tubes and sections as well as for slabs, blooms and billets based on paint marking with sing ...

Read more …

RH-Revolving Head Stamping Machine

The Revolving Head Stamping Machine is designed for the permanent marking of slabs, blooms and billets by the stamping of unmistakable and full characters.

Read more …

DP-Dot Paint Marking Machine (7 or 9 Nozzles Classic)

The Dot Paint Marking Machine is designed for the marking of coils, slabs, blooms and billets based on paint marking with 7 or 9 nozzle marking sections.

Read more …

RT-Reading & Tracking System

The reading and tracking system is an automatic reading system for many kinds of marked, labelled and printed products which allows material tracking from casting to roll ...

Read more …

Billet

TC-Torch Cutting Machine

The high performance Alpine Metal Tech Torch Cutting Machine is designed for cutting casting products on the fly or offline products.

Read more …

DB-Deburrer

The in-line rotary hammer type deburring machine is designed for removing burrs from continous casting products (slab, bloom, billet) caused by torch cutting.

Read more …

MP-Metal Powder Marking Machine

The Metal Powder Marking Machine is designed for marking of slabs and blooms by blowing metal powder through a gas flame for melting it to the surface of the product.

Read more …

HS-Hot Spray Marking Machine

The Hot Spray Marking Machine is designed for the marking of slabs and blooms by blowing liquid metal which is melt in an electric arc between two wires to the surface of ...

Read more …

SN-Single Nozzle Paint Marking Machine

The Single Nozzle Paint Marking Machine is designed for the marking of coils, tubes and sections as well as for slabs, blooms and billets based on paint marking with sing ...

Read more …

RH-Revolving Head Stamping Machine

The Revolving Head Stamping Machine is designed for the permanent marking of slabs, blooms and billets by the stamping of unmistakable and full characters.

Read more …

DP-Dot Paint Marking Machine (7 or 9 Nozzles Classic)

The Dot Paint Marking Machine is designed for the marking of coils, slabs, blooms and billets based on paint marking with 7 or 9 nozzle marking sections.

Read more …

RT-Reading & Tracking System

The reading and tracking system is an automatic reading system for many kinds of marked, labelled and printed products which allows material tracking from casting to roll ...

Read more …

Sizing-Conditioning
Slab

Scarfing Manipulator

The Scarfing Manipulator eliminates surface impurities from casting products in selective areas and is used for scarfing of bands.

Read more …

Scarfing Machine

Scarfing Machines eliminate surface impurities from casting products in all areas. 2-or 4 side scarfing machines are available with the corresponding throughput.

Read more …

Torch Cutting (Finishing, Slitting or Cross-Cutting)

The Torch Cutting for slitting and transversal cutting is designed to cut slabs, twins, billets or blooms to the final dimnesions requested by the customer.

Read more …

Manual/Portable Sizing | Conditioning

The hand-operated Cutting Torch is designed for emergency cuts in continuous casting plants and cutting up scrap parts.

Read more …

Bloom

Scarfing Manipulator

The Scarfing Manipulator eliminates surface impurities from casting products in selective areas and is used for scarfing of bands.

Read more …

Scarfing Machine

Scarfing Machines eliminate surface impurities from casting products in all areas. 2-or 4 side scarfing machines are available with the corresponding throughput.

Read more …

Torch Cutting (Finishing, Slitting or Cross-Cutting)

The Torch Cutting for slitting and transversal cutting is designed to cut slabs, twins, billets or blooms to the final dimnesions requested by the customer.

Read more …

Manual/Portable Sizing | Conditioning

The hand-operated Cutting Torch is designed for emergency cuts in continuous casting plants and cutting up scrap parts.

Read more …

Billet

Scarfing Manipulator

The Scarfing Manipulator eliminates surface impurities from casting products in selective areas and is used for scarfing of bands.

Read more …

Scarfing Machine

Scarfing Machines eliminate surface impurities from casting products in all areas. 2-or 4 side scarfing machines are available with the corresponding throughput.

Read more …

Torch Cutting (Finishing, Slitting or Cross-Cutting)

The Torch Cutting for slitting and transversal cutting is designed to cut slabs, twins, billets or blooms to the final dimnesions requested by the customer.

Read more …

Manual/Portable Sizing | Conditioning

The hand-operated Cutting Torch is designed for emergency cuts in continuous casting plants and cutting up scrap parts.

Read more …

Plate

Manual/Portable Sizing | Conditioning

The hand-operated Cutting Torch is designed for emergency cuts in continuous casting plants and cutting up scrap parts.

Read more …

CCM-Package
Slab

CCM-Package

The Alpine Metal Tech CCM Package supports and optimizes the performance of continuous casting machines and consists of a shroud manipulator, a powder feeder, a preheatin ...

Read more …

Bloom

CCM-Package

The Alpine Metal Tech CCM Package supports and optimizes the performance of continuous casting machines and consists of a shroud manipulator, a powder feeder, a preheatin ...

Read more …

Billet

CCM-Package

The Alpine Metal Tech CCM Package supports and optimizes the performance of continuous casting machines and consists of a shroud manipulator, a powder feeder, a preheatin ...

Read more …

Long Rolling
Beam

Rolling Stand

KOCH H&K shapes steel with rolling forces of up to 25.000 kN in single stands or complete rolling mills.

Read more …

Saws

KOCH H&K designs and supplies a wide range of sliding frame and chop saws with blade diameters up to 2,400 mm for rails, beams and sections.

Read more …

Cooling Bed

On KOCH H&K cooling beds, long products cool down homogeneously and are transported with great care..

Read more …

Section

Rolling Stand

KOCH H&K shapes steel with rolling forces of up to 25.000 kN in single stands or complete rolling mills.

Read more …

Abrasive Cutting Machine

Abrasive cutting machines are used for cutting hot and cold steel products when specific high demands are placed on the quality of the cut. 

Read more …

Saws

KOCH H&K designs and supplies a wide range of sliding frame and chop saws with blade diameters up to 2,400 mm for rails, beams and sections.

Read more …

Stationary Shears

Stationary shears are used for large cross-sections, the material is stopped for the cut. They operate with a force of 12,500 kN and above and are used for cold and hot c ...

Read more …

Cooling Bed

On KOCH H&K cooling beds, long products cool down homogeneously and are transported with great care..

Read more …

Bar

Rolling Stand

KOCH H&K shapes steel with rolling forces of up to 25.000 kN in single stands or complete rolling mills.

Read more …

Rail

Rolling Stand

KOCH H&K shapes steel with rolling forces of up to 25.000 kN in single stands or complete rolling mills.

Read more …

Saws

KOCH H&K designs and supplies a wide range of sliding frame and chop saws with blade diameters up to 2,400 mm for rails, beams and sections.

Read more …

Cooling Bed

On KOCH H&K cooling beds, long products cool down homogeneously and are transported with great care..

Read more …

Straighteners

Koch H&K Straightening Machines allow steel producer to deliver straight products with minimal residual stresses.

Read more …

Sheet Pile

Rolling Stand

KOCH H&K shapes steel with rolling forces of up to 25.000 kN in single stands or complete rolling mills.

Read more …

Bloom

Stationary Shears

Stationary shears are used for large cross-sections, the material is stopped for the cut. They operate with a force of 12,500 kN and above and are used for cold and hot c ...

Read more …

Straighteners

Koch H&K Straightening Machines allow steel producer to deliver straight products with minimal residual stresses.

Read more …

Billet

Stationary Shears

Stationary shears are used for large cross-sections, the material is stopped for the cut. They operate with a force of 12,500 kN and above and are used for cold and hot c ...

Read more …

Cooling Bed

On KOCH H&K cooling beds, long products cool down homogeneously and are transported with great care..

Read more …

Straighteners

Koch H&K Straightening Machines allow steel producer to deliver straight products with minimal residual stresses.

Read more …

Identification
Plate

DP-Dot Paint Marking Machine (7 or 9 Nozzles Classic)

The Dot Paint Classic Marking Machine is designed for marking hot steel products while the product is moving or during standstill.

Read more …

CJ-CombiJet Paint Marking Machine High Resolution (16 Nozzles)

The CombiJet Paint Marking Machine is designed for marking cold steel plates and sheets while the product is moving or during standstill.

Read more …

MX/PU-Punch Marking Machine

The Permanent Marking Machine is designed for applying permanent marking on steel products by the stamping of characters of different sizes and number of lines.

Read more …

ED-Plate Edge Marking Machine

The Edge Marking Machines are designed for marking steel plates and sheets with alphanumeric and machine readable codes on the edges of the plate products.

Read more …

CJ/PU/ED-Combined Automated Marking Machine

The combination three marking technologies (paint, punch and edge) and customized design makes the Combined Marking Machine a perfect solution for optimizing any steel pr ...

Read more …

High resolution quality marking for branding

With the CombiJet Technology, Alpine Metal Tech offers a solution to mark a brand or company logo on steel products that can be used to turn the anonymous product into an ...

Read more …

CJ/DP/PU-Combined Marking Machine

The combination three marking technologies (paint, punch and edge) and customized design makes the Combined Marking Machine a perfect solution for optimizing any steel pr ...

Read more …

RT-Reading & Tracking System

The reading and tracking system is an automatic reading system for many kinds of marked, labelled and printed products which allows material tracking from casting to roll ...

Read more …

Sheet

DP-Dot Paint Marking Machine (7 or 9 Nozzles Classic)

The Dot Paint Classic Marking Machine is designed for marking hot steel products while the product is moving or during standstill.

Read more …

CJ-CombiJet Paint Marking Machine High Resolution (16 Nozzles)

The CombiJet Paint Marking Machine is designed for marking cold steel plates and sheets while the product is moving or during standstill.

Read more …

MX/PU-Punch Marking Machine

The Permanent Marking Machine is designed for applying permanent marking on steel products by the stamping of characters of different sizes and number of lines.

Read more …

ED-Plate Edge Marking Machine

The Edge Marking Machines are designed for marking steel plates and sheets with alphanumeric and machine readable codes on the edges of the plate products.

Read more …

CJ/PU/ED-Combined Automated Marking Machine

The combination three marking technologies (paint, punch and edge) and customized design makes the Combined Marking Machine a perfect solution for optimizing any steel pr ...

Read more …

High resolution quality marking for branding

With the CombiJet Technology, Alpine Metal Tech offers a solution to mark a brand or company logo on steel products that can be used to turn the anonymous product into an ...

Read more …

CJ/DP/PU-Combined Marking Machine

The combination three marking technologies (paint, punch and edge) and customized design makes the Combined Marking Machine a perfect solution for optimizing any steel pr ...

Read more …

RT-Reading & Tracking System

The reading and tracking system is an automatic reading system for many kinds of marked, labelled and printed products which allows material tracking from casting to roll ...

Read more …

Pipe

MX/PU-Punch Marking Machine

The Permanent Marking Machine is designed for applying permanent marking on steel products by the stamping of characters of different sizes and number of lines.

Read more …

High resolution quality marking for branding

With the CombiJet Technology, Alpine Metal Tech offers a solution to mark a brand or company logo on steel products that can be used to turn the anonymous product into an ...

Read more …

CJ-CombiJet Standard Package

The Standard Package CombiJet is designed for marking steel tubes, pipes and profiles based on paint marking with 9, 16 or 32 nozzle marking sections.

Read more …

CJ/DP/PU-Combined Marking Machine

The combination three marking technologies (paint, punch and edge) and customized design makes the Combined Marking Machine a perfect solution for optimizing any steel pr ...

Read more …

RT-Reading & Tracking System

The reading and tracking system is an automatic reading system for many kinds of marked, labelled and printed products which allows material tracking from casting to roll ...

Read more …

Profile

MX/PU-Punch Marking Machine

The Permanent Marking Machine is designed for applying permanent marking on steel products by the stamping of characters of different sizes and number of lines.

Read more …

High resolution quality marking for branding

With the CombiJet Technology, Alpine Metal Tech offers a solution to mark a brand or company logo on steel products that can be used to turn the anonymous product into an ...

Read more …

CJ-CombiJet Standard Package

The Standard Package CombiJet is designed for marking steel tubes, pipes and profiles based on paint marking with 9, 16 or 32 nozzle marking sections.

Read more …

CJ/DP/PU-Combined Marking Machine

The combination three marking technologies (paint, punch and edge) and customized design makes the Combined Marking Machine a perfect solution for optimizing any steel pr ...

Read more …

RT-Reading & Tracking System

The reading and tracking system is an automatic reading system for many kinds of marked, labelled and printed products which allows material tracking from casting to roll ...

Read more …

Coil

DP-Dot Paint Marking Machine (7 or 9 Nozzles Classic)

The Dot Paint Marking Machine is designed for the marking of coils, slabs, blooms and billets based on paint marking with 7 or 9 nozzle marking sections.

Read more …

CJ-CombiJet Paint Marking Machine High Resolution (16 Nozzles)

The CombiJet Paint Marking Machine is designed for marking cold steel plates and sheets with high resolution markings while the product is moving or during standstill.

Read more …

SN-Single Nozzle Paint Marking Machine

The Single Nozzle Paint Marking Machine is designed for the marking of coils, tubes and sections as well as for slabs, blooms and billets based on paint marking with sing ...

Read more …

RT-Reading & Tracking System

The reading and tracking system is an automatic reading system for many kinds of marked, labelled and printed products which allows material tracking from casting to roll ...

Read more …

Rail

RT-Reading & Tracking System

The reading and tracking system is an automatic reading system for many kinds of marked, labelled and printed products which allows material tracking from casting to roll ...

Read more …

Inspection
Bloom

Testing Lines

A complete testing line combines measuring and image processing systems for contact-less testing of rails and further long products as well as billets and blooms.

Read more …

Brushing Machines

A brushing machine is used for the efficient removal of loose scale for a host of profiles for the improvement in surface quality and surface preperation prior the entry ...

Read more …

Straightness Measurement

Straightness measurement is a contact-less optical measuring method for measuring the straightness of rails allowing faster and more precise quality checks.

Read more …

Profile Measurement

With the profile Measurement system utilising light sectioning techniques, it becomes feasible to measure under all conditions with the highest accuracy.

Read more …

Eddy Current Testing

The online inspection system based on eddy current is used for the detection of longitudinal and transversal surface defects on rails and other rolled material.

Read more …

Ultrasonic Testing

The automatic Vision System allows automatic detection of defects on rail surfaces by means of image processing, even on surfaces with a big amount of scales.

Read more …

3D Vision System

The automatic Vision System allows automatic detection of defects on rail surfaces by means of image processing, even on surfaces with a big amount of scales.

Read more …

Billet

Testing Lines

A complete testing line combines measuring and image processing systems for contact-less testing of rails and further long products as well as billets and blooms.

Read more …

Brushing Machines

A brushing machine is used for the efficient removal of loose scale for a host of profiles for the improvement in surface quality and surface preperation prior the entry ...

Read more …

Straightness Measurement

Straightness measurement is a contact-less optical measuring method for measuring the straightness of rails allowing faster and more precise quality checks.

Read more …

Profile Measurement

With the profile Measurement system utilising light sectioning techniques, it becomes feasible to measure under all conditions with the highest accuracy.

Read more …

Eddy Current Testing

The online inspection system based on eddy current is used for the detection of longitudinal and transversal surface defects on rails and other rolled material.

Read more …

Ultrasonic Testing

The automatic Vision System allows automatic detection of defects on rail surfaces by means of image processing, even on surfaces with a big amount of scales.

Read more …

3D Vision System

The automatic Vision System allows automatic detection of defects on rail surfaces by means of image processing, even on surfaces with a big amount of scales.

Read more …

Pipe

Testing Lines

A complete testing line combines measuring and image processing systems for contact-less testing of rails and further long products as well as billets and blooms.

Read more …

Brushing Machines

A brushing machine is used for the efficient removal of loose scale for a host of profiles for the improvement in surface quality and surface preperation prior the entry ...

Read more …

Straightness Measurement

Straightness measurement is a contact-less optical measuring method for measuring the straightness of rails allowing faster and more precise quality checks.

Read more …

Profile Measurement

With the profile Measurement system utilising light sectioning techniques, it becomes feasible to measure under all conditions with the highest accuracy.

Read more …

Eddy Current Testing

The online inspection system based on eddy current is used for the detection of longitudinal and transversal surface defects on rails and other rolled material.

Read more …

Ultrasonic Testing

The automatic Vision System allows automatic detection of defects on rail surfaces by means of image processing, even on surfaces with a big amount of scales.

Read more …

3D Vision System

The automatic Vision System allows automatic detection of defects on rail surfaces by means of image processing, even on surfaces with a big amount of scales.

Read more …

Profile

Testing Lines

A complete testing line combines measuring and image processing systems for contact-less testing of rails and further long products as well as billets and blooms.

Read more …

Brushing Machines

A brushing machine is used for the efficient removal of loose scale for a host of profiles for the improvement in surface quality and surface preperation prior the entry ...

Read more …

Straightness Measurement

Straightness measurement is a contact-less optical measuring method for measuring the straightness of rails allowing faster and more precise quality checks.

Read more …

Profile Measurement

With the profile Measurement system utilising light sectioning techniques, it becomes feasible to measure under all conditions with the highest accuracy.

Read more …

Eddy Current Testing

The online inspection system based on eddy current is used for the detection of longitudinal and transversal surface defects on rails and other rolled material.

Read more …

Ultrasonic Testing

The automatic Vision System allows automatic detection of defects on rail surfaces by means of image processing, even on surfaces with a big amount of scales.

Read more …

3D Vision System

The automatic Vision System allows automatic detection of defects on rail surfaces by means of image processing, even on surfaces with a big amount of scales.

Read more …

Rail

Testing Lines

A complete testing line combines measuring and image processing systems for contact-less testing of rails and further long products as well as billets and blooms.

Read more …

Brushing Machines

A brushing machine is used for the efficient removal of loose scale for a host of profiles for the improvement in surface quality and surface preperation prior the entry ...

Read more …

Straightness Measurement

Straightness measurement is a contact-less optical measuring method for measuring the straightness of rails allowing faster and more precise quality checks.

Read more …

Profile Measurement

With the profile Measurement system utilising light sectioning techniques, it becomes feasible to measure under all conditions with the highest accuracy.

Read more …

Eddy Current Testing

The online inspection system based on eddy current is used for the detection of longitudinal and transversal surface defects on rails and other rolled material.

Read more …

Ultrasonic Testing

The automatic Vision System allows automatic detection of defects on rail surfaces by means of image processing, even on surfaces with a big amount of scales.

Read more …

3D Vision System

The automatic Vision System allows automatic detection of defects on rail surfaces by means of image processing, even on surfaces with a big amount of scales.

Read more …

Testing
Aluminium Wheel

ZWARP – Biaxial wheel test

The biaxial wheel test machine called ZWARP, is used for fatigue tests or life tests of disc wheels. The wheel is running inside a drum and is applied to with radial- and ...

Read more …

ZWARP – Multiaxial wheel test

The multi-axial test machine is used for fatigue and endurance tests on aluminium wheels for cars and light trucks, by rim-rolling them on a coated load drum.

Read more …

Impact Test Bench

The Impact test machine was developed specifically for impact tests and is suitable for all tests worldwide.

Read more …

RRH - Radial Fatigue Test

The RRH machine is used for fatigue and endurance testing of wheels by rolling the wheel on a drum under specific radial load conditions.

Read more …

BUP – Cornering Fatigue Test Machine

The MAKRA Test machine BUP 760 is used for fatigue tests on vehicle wheels with the method of rotating centrifugal weight.

Read more …

EXA - Concentricity- and Runout Measuring Machine

MAKRA measuring machines were developed to make the simultaneous measurement of concentricity and run-out on the outer and inner tyre seat possible.

Read more …

Testing and Measurement Instruments

For more than 20 years MAKRA has been manufacturing measuring and testing equipment for the wheel industry.

Read more …

Radial Impact Test Bench

The radial impact test is useful to prevent dents in the inner rim flange when small obstacles are driven over

Read more …

Steel Wheel

ZWARP – Biaxial wheel test

The biaxial wheel test machine called ZWARP, is used for fatigue tests or life tests of disc wheels. The wheel is running inside a drum and is applied to with radial- and ...

Read more …

ZWARP – Multiaxial wheel test

The multi-axial test machine is used for fatigue and endurance tests on aluminium wheels for cars and light trucks, by rim-rolling them on a coated load drum.

Read more …

Impact Test Bench

The Impact test machine was developed specifically for impact tests and is suitable for all tests worldwide.

Read more …

RRH - Radial Fatigue Test

The RRH machine is used for fatigue and endurance testing of wheels by rolling the wheel on a drum under specific radial load conditions.

Read more …

BUP – Cornering Fatigue Test Machine

The MAKRA Test machine BUP 760 is used for fatigue tests on vehicle wheels with the method of rotating centrifugal weight.

Read more …

EXA - Concentricity- and Runout Measuring Machine

MAKRA measuring machines were developed to make the simultaneous measurement of concentricity and run-out on the outer and inner tyre seat possible.

Read more …

Testing and Measurement Instruments

For more than 20 years MAKRA has been manufacturing measuring and testing equipment for the wheel industry.

Read more …

Radial Impact Test Bench

The radial impact test is useful to prevent dents in the inner rim flange when small obstacles are driven over

Read more …

Production
Aluminium Wheel

NUMTEC Barcode

BC is the best system for automatic reading of barcode on aluminum wheels. By using the BC the code remains automatically readable after heat treatment.

Read more …

RP Rotation- and Positioning Stations

With our rotation station you have the exact suitable version for any applications.

Read more …

MARK 100 Marking system

The MARK100 system is a fully integrated machine for automatic pin stamping of alloy wheels. The system can apply any kind of alphanumeric characters as replacement of ma ...

Read more …

MARK 400 – Unique Serial Number System

Continuously increasing demand from the automotive industry for documentation and traceability of all productionsteps will require a unique serial number for aluminium wh ...

Read more …

MD 300 / 320– Positioning and Distortion Measurement

The MD300/320 machine is used for 100% process control measurement of alloy wheels before entering the CNC machining cell.

Read more …

MD 400, MD 410 – Measurement of the Fit

This Station is designed for use within fully automatic machining lines. In combination with a BC system, the wheels will be automatically identified, positioned and meas ...

Read more …

CAM 100 – Valve hole measurement

The measuring station is used for precise wheel orientation on the pre-cast of the valve hole.

Read more …

DHS – Valve Stem Sealing Handling System

The valve stem handling system is used for fully automatic sealing of the valve hole prior to helium leak test.

Read more …

MD 200 – Measurement machine for diamond cut

The NUMTEC MD200 measuring machine is used for the precise measurement of the front face of wheels for the diamond cut.

Read more …

ABV – Sprue Point Drilling Machine

The ABV machine is developed for the automatic sprue point drilling of alloy wheels after the casting process. It’s a strong and reliable machine, setting the standard ...

Read more …

Wheel Deburring Machine

For the automated deburring of these wheels in the horn and rims area MAKRA has developed various types of machines.

Read more …

Robot Cells

Flexible robot cells for fully automatic mixed wheel production in best wheel quality

Read more …

MD 140 – Inline-Distortion Measurement

The NUMTEC MD140 measurement machine will be used for 100% distortion monitoring of cast alloy wheels directly after the casting process or after the heat treatment proce ...

Read more …

MD 825 – Automatic Wheel Type Recognition

The NUMTEC MD 825 is a fully automatic design recognition system for cast alloy wheels. The wheels can be recognized with the as-cast surface at the beginning of the prod ...

Read more …

MD 30 – Flexible Laser Measurement for Alloy Wheels

The flexible MD30 laser measurement machine is used for distortion measurement at manually operated machining lines.

Read more …

MD 860 – Modular Inline Testing Machine

The MAKRA Inline-testing machine for aluminium wheels. Security for your production with 100 % inspection of all critical wheel parameters at every single wheel.

Read more …

Steel Wheel

NUMTEC Barcode

BC is the best system for automatic reading of barcode on aluminum wheels. By using the BC the code remains automatically readable after heat treatment.

Read more …

RP Rotation- and Positioning Stations

With our rotation station you have the exact suitable version for any applications.

Read more …

MARK 100 Marking system

The MARK100 system is a fully integrated machine for automatic pin stamping of alloy wheels. The system can apply any kind of alphanumeric characters as replacement of ma ...

Read more …

MARK 400 – Unique Serial Number System

Continuously increasing demand from the automotive industry for documentation and traceability of all productionsteps will require a unique serial number for aluminium wh ...

Read more …

MD 300 / 320– Positioning and Distortion Measurement

The MD300/320 machine is used for 100% process control measurement of alloy wheels before entering the CNC machining cell.

Read more …

MD 400, MD 410 – Measurement of the Fit

This Station is designed for use within fully automatic machining lines. In combination with a BC system, the wheels will be automatically identified, positioned and meas ...

Read more …

CAM 100 – Valve hole measurement

The measuring station is used for precise wheel orientation on the pre-cast of the valve hole.

Read more …

DHS – Valve Stem Sealing Handling System

The valve stem handling system is used for fully automatic sealing of the valve hole prior to helium leak test.

Read more …

MD 200 – Measurement machine for diamond cut

The NUMTEC MD200 measuring machine is used for the precise measurement of the front face of wheels for the diamond cut.

Read more …

ABV – Sprue Point Drilling Machine

The ABV machine is developed for the automatic sprue point drilling of alloy wheels after the casting process. It’s a strong and reliable machine, setting the standard ...

Read more …

Wheel Deburring Machine

For the automated deburring of these wheels in the horn and rims area MAKRA has developed various types of machines.

Read more …

Robot Cells

Flexible robot cells for fully automatic mixed wheel production in best wheel quality

Read more …

MD 140 – Inline-Distortion Measurement

The NUMTEC MD140 measurement machine will be used for 100% distortion monitoring of cast alloy wheels directly after the casting process or after the heat treatment proce ...

Read more …

MD 825 – Automatic Wheel Type Recognition

The NUMTEC MD 825 is a fully automatic design recognition system for cast alloy wheels. The wheels can be recognized with the as-cast surface at the beginning of the prod ...

Read more …

MD 30 – Flexible Laser Measurement for Alloy Wheels

The flexible MD30 laser measurement machine is used for distortion measurement at manually operated machining lines.

Read more …

MD 860 – Modular Inline Testing Machine

The MAKRA Inline-testing machine for aluminium wheels. Security for your production with 100 % inspection of all critical wheel parameters at every single wheel.

Read more …

Chucking-Workholding
Aluminium Wheel

Chucking at 1st Operation

Chucking solutions with fi nger chucks for highest quality of wheels in respect of runout and imbalance

Read more …

Chucking at 2nd Operation

Chucking at the machined inboard fl ange with 3-jaw chuck with centrifugal force balancing for constant chucking force over the total rpm range

Read more …

Workholding for Drilling

For the workholding at CNC bolt hole and valve hole drilling, a wide range of different types of workholding is available

Read more …

Steel Wheel

Chucking at 1st Operation

Chucking solutions with fi nger chucks for highest quality of wheels in respect of runout and imbalance

Read more …

Chucking at 2nd Operation

Chucking at the machined inboard fl ange with 3-jaw chuck with centrifugal force balancing for constant chucking force over the total rpm range

Read more …

Workholding for Drilling

For the workholding at CNC bolt hole and valve hole drilling, a wide range of different types of workholding is available

Read more …

Contour Deburring Tools
Aluminium Wheel

Guide Rail

Guide rail for longitudinal edges, a useful accessory

Read more …

MAKRA Foot Switch

For quick engine friendly work due to runtime reduction

Read more …

KFA 290 Edge Milling Top Part

With the quick change edge deburring top part KFA the KEG 250 is converted into a full chamfering device for rectangular workpieces

Read more …

KFW 280 Edge Milling Carriage

For sensitive work surfaces combined with good material handling

Read more …

AFW 80 Cut-off Bunch Milling Carriage

With the quick-change cut-off bunch milling carriage the KEG 250 is converted into a fully flegded "Cut-off bunch remover"

Read more …

KEG 250 Contour

Clean and nice edges in a handle

Read more …

Edge Deburring Tools
Aluminium Wheel

KEG 251 S

Perfect for edge trimming of welds at the sheet metal working

Read more …

KEG 251 K

Precise contour deburring of large workpieces

Read more …

KEG 251 P

Chamfers on large and small parts

Read more …

KEG 251 T

Perfect for contour deburring of small workpieces

Read more …

KEG 251 Set

For flexibility of use in the installation area, the use of secondary times for processing machines or at the workbench

Read more …

KEG 253

For attaching chamfers and welding bevels for large workpieces

Read more …

KEG 152 V

 For attaching welding bevels and large chamfers for large and heavy workpieces

Read more …

KEG 151

For mobile use, for easy edgg deburring or for producing a weld chamfer on large workpieces or small lot sizes

Read more …

KEG 500

Stationary unit for large work pieces, for easy edge deburring or for producing a weld chamfer

Read more …

KEG 400

Design with powerful milling motor for larger workpieces

Read more …

KEG 300

Solution for medium sized workpieces

Read more …

KEG 150

For direct use in metal cutting of machine tools

Read more …

Recess Milling Tools
Aluminium Wheel

Full Carbide Milling Tool

FFG 201 Handheld Device

The handheld device FFG 201 is designed for the machining of large workpieces and is moved along the workpiece

Read more …

FFG 200 Floor Standing Device

At the stationary device FFG 200, the workpiece is moved manually over the guide prism

Read more …